Plastic Pipe Extrusion Line
Single-Station Pipe Coiler for HDPE Pipe Extrusion
URIDGE builds single-station HDPE pipe coilers for 16–110 mm pipe at up to 25 m/min, with traverse winding, tension control and custom coil sizing.
- Turnkey design & installation
- ISO9001 / CE certified
- 24/7 global after-sales support
Product Overview
The URIDGE Single-Station Pipe Coiler is designed for winding flexible HDPE pipe into organized coils at the end of a pipe extrusion line. The machine can be configured for HDPE pipes from approximately 16 mm to 110 mm in diameter and supports winding speeds up to 25 m/min.
Because pipe diameter, wall thickness, coil dimensions and line speed vary between applications, the winding structure is configured according to the customer’s actual pipe and coil requirements. A double-station pipe coiler can also be supplied when required.
Applications
The coiler is intended for HDPE pipe winding and downstream handling on HDPE pipe extrusion lines, collecting continuous flexible HDPE pipe into coils. The machine is designed for flexible HDPE pipe that is suitable for coiling.
Pipe Diameter Range
The coiler can be configured for HDPE pipes from approximately 16 mm to 110 mm in diameter. Final machine configuration depends on pipe diameter, pipe wall thickness, required coil size and line speed.
Winding Speed
The maximum winding speed is up to 25 m/min. Actual winding speed depends on pipe diameter, pipe stiffness, extrusion line speed and coil requirements.
Reciprocating Traverse
The reciprocating traverse mechanism guides the HDPE pipe across the reel during winding. The traverse movement helps distribute the pipe across the coil width and supports organized coil formation.
Tension Control
Depending on the application, the coiler can be configured with a tension-control system or a torque-motor solution.
Pneumatic System
Pneumatic operating mechanisms are used to support reel handling and machine operation.
VFD Drive Control
The winding system uses variable-frequency drive (VFD) control so that operating speed can be adjusted according to different pipe sizes and production conditions.
Integration with the Pipe Extrusion Line
The pipe coiler is installed downstream of the HDPE pipe extrusion line after pipe forming, cooling and haul-off. Its winding speed is adjusted to suit the pipe extrusion conditions so that the finished flexible pipe can be collected into coils.
Single-Station and Double-Station Options
This product is a single-station pipe coiler. A double-station pipe coiler can also be supplied according to pipe size, line speed and production requirements.
Key Technical Data
| Parameter | Specification |
|---|---|
| Application | HDPE Pipe Winding |
| Pipe Diameter | 16–110 mm |
| Maximum Winding Speed | Up to 25 m/min |
| Maximum Coil Outer Diameter | 1.2 m |
| Maximum Coil Width | 0.8 m |
| Winding Station | Single Station |
| Traverse | Reciprocating Traverse |
| Tension Control | Tension Control or Torque Motor |
| Pneumatic System | Pneumatic Operating Mechanisms |
| Drive Control | Variable-Frequency Drive |
| Optional Configuration | Double-Station Pipe Coiler |
Customized Configuration
The coiler is configured according to the customer’s actual pipe and production requirements. When requesting a quotation, it helps to provide pipe diameter, pipe wall thickness or SDR, extrusion line speed, required coil length, required coil outer diameter, required coil width, single- or double-station preference, local voltage and frequency, and available installation space.
Factory Testing
The pipe coiler is tested before shipment to verify machine operation and winding functions.
Installation and Technical Support
URIDGE provides installation, commissioning, operator training and spare-parts support for the pipe coiler.
- Warranty period: 1 year
- Typical production lead time: approximately 2 months
Frequently Asked Questions
What pipe diameters can the coiler handle?
The coiler can be configured for HDPE pipes from approximately 16 mm to 110 mm in diameter.
What is the maximum winding speed?
The maximum winding speed is up to 25 m/min. Actual operating speed depends on pipe size, pipe properties and production conditions.
What is the maximum coil size?
The coiler can be configured for coil outer diameters up to approximately 1.2 m and coil widths up to approximately 0.8 m.
Does the coiler have traverse winding?
Yes. The machine uses a reciprocating traverse mechanism to guide the pipe across the reel during winding.
How is winding tension controlled?
Depending on the application, the machine can use a tension-control system or a torque-motor configuration.
Can URIDGE supply a double-station pipe coiler?
Yes. A double-station configuration can be supplied according to pipe size, line speed and production requirements.
Tell Us Your Pipe and Coil Requirements
To configure a suitable pipe coiler, please send us:
- Pipe diameter
- Pipe wall thickness / SDR
- Production line speed
- Required coil length
- Required coil diameter
- Required coil width
- Single- or double-station requirement
- Local voltage and frequency
- Available installation space
You can request a quote or use the WhatsApp contact on this page to start.
Technical Specifications
Detailed parameters (capacity, screw diameter, installed power, dimensions, voltage) are tailored to your material and output requirement.
Request Spec Sheet Get a Quote
Ready to Upgrade Your Production Line?
Contact us today for a free consultation and a tailored solution.